Fire Sprinkler
by _gid
Fire Sprinkler is a server-side mod that turns a button into a fire sprinkler: when a fire starts below it, water sprays down and puts the fire out.
What it does
A button placed on the underside of a block that holds water becomes an armed sprinkler. It stays inert until a fire starts in the spray cone beneath it, then the water falls like rain and the fire goes out with the usual extinguish hiss and puff of steam. Mobs that walk through the spray stop burning. Because the sprinkler only activates on fire, the water it produces has no other effect on the world.
The spray widens as it falls, forming a confined square of 11 by 11 blocks. It drops straight down and reaches only the solid floor directly beneath. Any solid block above the sprinkler's level stops the water, so roofs, full blocks, slabs, stairs, fences and closed trapdoors all block it. Spray passes through open trapdoors, string, torches, carpets, flowers, and any block holding water or waterlogged.
The mod is published for Fabric and NeoForge, with builds for 26.1.2, 26.2 and 26.3, and is open source under the MIT License. Client-side water drips can be avoided by placing the water supply in a different way, for example by waterlogging a grate or a leaf block two stone blocks above the button.
Key features
Button-triggered sprinkler
A button under a water-carrying block becomes a sprinkler that waits silently for fire in its spray area.
Fire-activated spray
Water falls only when a fire starts within the spray cone, so the sprinkler stays dormant otherwise.
Confined 11 by 11 spray
The spray widens into a square of 11 by 11 blocks and falls straight down to the solid floor beneath.
Obstruction rules
Solid blocks, slabs, stairs, fences and closed trapdoors stop the water, while open trapdoors and water blocks let it through.
Gallery
Compatibility
Latest build for each game version and loader.
Only full game releases are shown. This mod publishes no snapshot builds.
How it compares
Hydrofarm is a client and server mod for Fabric and NeoForge, built for 26.1 – 26.3, under the MIT License. Burning Energy is server-side only, open source under the MIT License, and covers 1.21 – 26.3 on Fabric alone. Power Farm is for Fabric only, targets 26.2, is not open source, and can run on a client or a server, with neither side required.
| Mod | Loaders | Game versions | Environment | Updated |
|---|---|---|---|---|
| Fire Sprinkler | Fabric and NeoForge | 26.1.2 – 26.3 | Server-side only | 2026-09-19 |
| Hydrofarm | Fabric and NeoForge | 26.1 – 26.3 | Client and server | 2026-09-22 |
| Burning Energy | Fabric | 1.21 – 26.3 | Server-side only | 2026-09-11 |
| Power Farm | Fabric | 26.2 | Client or server, optional | 2026-08-20 |
Questions
Does Fire Sprinkler need to be installed on clients?
Which loaders does Fire Sprinkler support?
Why does the water not reach the floor under a roof?
In the catalog
Fire Sprinkler is one of 8,499 Technology mods on ModsFinder, and one of 4,201 Technology mods for Fabric. 8,071 mods support Minecraft 26.3.
More from _gid
Similar mods
What the author says
This small server-side-only mod turns a button into a working fire sprinkler. Place a button on the underside of a block that is waterlogged (or is a water source), and any fire that starts in the spray cone beneath it is put out just like rain — with a hiss and steam — and burning mobs walking through are…
Official listing
- Modrinth page
- modrinth.com/mod/fire-sprinkler
- Owner
- _gid
- Published
- 2026-07-20
- Updated on Modrinth
- 2026-09-19
- Facts verified
- 2026-10-15
